Contents

Multi-beam IR barrier Acacia

In a nutshell. Acacia is an active IR perimeter barrier: crossing the invisible boundary sends an alarm to the guard post. The detectors are built as decorative lighting columns and stand out nowhere on the grounds — the barrier is invisible to the intruder. The towers are delivered fully assembled, floor-standing mounting — they can be deployed quickly even at temporary sites.

Physical principle of operation

The transmitter emits near-infrared beams invisible to the eye. The beams are modulated — they "flicker" at a specific frequency. The receiver is tuned to that frequency and extracts only its own signal, ignoring ambient light: the sun, lamps, reflections from surfaces.

The receiver's photodetector continuously measures the level of incoming radiation. When an intruder blocks a beam, the signal power drops sharply — the receiver registers the loss and raises an alarm. Between the Acacia transmitter and receiver an IR barrier of four or eight parallel beams is formed: crossing the invisible boundary sends an alarm to the guard post.

Acacia is an active IR perimeter barrier: crossing the invisible boundary sends an alarm to the guard post. The barrier consists of a transmitter and a receiver installed within direct line of sight of each other.

Key features:

  • Narrow detection zone — the beam sensors form a precise point line, which matters especially when there is no clear zone free of trees and bushes around the perimeter;
  • Camouflage — the detectors are built as decorative lighting columns and do not stand out on the grounds;
  • Ready to install — the towers are delivered fully assembled, floor-standing mounting;
  • Works in dense building layouts — frequency channel selection lets sets be installed close to each other.



Device Number of IR beams Protection rating Range Operating temperature Housing material Supply voltage
Acacia-4 4 IP65 10-100 m -30℃..+55℃ Plastic 12-18 V
Acacia-8 8 IP65 10-100 m -30℃..+55℃ Plastic 12-18 V