Active IR detectors IKS
In a nutshell. An active detector consists of two units — a transmitter and a receiver mounted facing each other. The transmitter emits an invisible infrared beam, and the receiver continuously "watches" it: as soon as the beam is interrupted, an alarm is raised. IKS is a linear single-beam detector: it forms a thin invisible boundary up to 100 m long with a 2-degree viewing angle. This is a narrow, precise security line — exactly what is needed at sites with no clear zone, where the barrier should be as narrow as possible.
Physical principle of operation
The transmitter emits near-infrared beams invisible to the eye. The beam is modulated — it "flickers" at a specific frequency. The receiver is tuned to that frequency and extracts only its own signal, ignoring ambient light: the sun, lamps, reflections from surfaces.
A photodetector of the receiver behind the lens continuously measures the level of incoming radiation. When an intruder interrupts the beam, the signal power drops sharply — the receiver registers the loss and raises an alarm.
A linear active IR detector for perimeter security. Recommended for sites with no clear zone.
The detector consists of a transmitter unit (TU) and a receiver unit (RU) installed on opposite sides of the protected zone — they form an IR beam whose crossing raises an alarm.
For quick and convenient alignment, use the PC-02 alignment tester.
Typical IKS-1 installation layout:
Signal barrier arrangement diagram:
| Device | Housing material | Detection zone length | Detection zone viewing angle | Protection rating | Operating temperature | Optics heating | Supply voltage |
|---|---|---|---|---|---|---|---|
| IKS-1 | Metal | up to 100 metres | 2 degrees | IP65 | -40℃..+50℃ | Yes | 8..28 V |
| IKS-1 variant 5 (Arctic) | Metal | up to 100 metres | 2 degrees | IP65 | -55℃..+50℃ | Yes | 8..28 V |
| IKS-3 | Plastic | up to 100 metres | 2 degrees | IP41 | -25℃..+50℃ | No | 8..28 V |
Technical Specifications
| Parameter | IKS-1 | IKS-1 v.5 | IKS-3 |
|---|---|---|---|
| Current (emitter/receiver), mA | ≤ 15 / 10 | ≤ 15 / 10 | ≤ 25 / 25 |
| Current with heater, mA | ≤ 40 / 30 | ≤ 200 / 200 | — |
| Max ambient illumination, lx | 12,000 | 12,000 | 12,000 |
| Dimensions (L×W×H), mm | 113×72×82 | 113×72×82 | 73×82×90 |
| Weight, kg | ≤ 0.3 | ≤ 0.35 | ≤ 0.22 |
| Detection speed (person), m/s | up to 10 | up to 10 | up to 10 |
| Alarm duration, s | ≥ 2 | ≥ 2 | ≥ 5 |
| Ready time after power-on, s | ≤ 30 | ≤ 30 | ≤ 30 |
| Service life, years | ≥ 10 | ≥ 10 | ≥ 10 |
| MTBF, h | 60,000 | 60,000 | 60,000 |
Documentation
| Device | Passport (PS) | Operation manual (RE) |
|---|---|---|
| IKS-1 | PS | RE |
| IKS-1 variant 5 | PS | RE |
| IKS-3 | PS | RE |